Technology in Library Spaces

ViewHub is a screencasting technology available in two rooms in Roesch Library: Room 115 and 223. Reserve a Huddle Room using the library’s room reservation system.

Both rooms are equipped with ViewHub screens that allow one user to cast their screen to the wall-mounted monitor to facilitate collaborations or small presentations. These rooms do not support HDMI input.

In order to connect and cast to the screen, you will need to install the T1V app (formerly known as AirConnect).

1. Go to the wall-mounted Crestron control panel near the TV.

   

   1. Press the Display Power button at the top left to turn on the TV.
   2. Adjust the Volume on the Crestron panel with the volume knob. The LED lights indicate the current volume level.
2. Use the T1V app on your device to screencast to the TV. Refer to Connect to a ViewHub Display for more information.
3. When finished, please turn off the display by pressing the Display Power button.

1. Download and install the T1V app (formerly known as AirConnect) on your laptop, tablet or smartphone.
   • For laptop installation, download the T1V app from https://www.t1v.com/airconnect-download/.
   • For smartphones and tablets, download the T1V app from the Apple App Store or Google Play.
2. Turn on the display using the Display Power button on the wall panel to the right of the ViewHub monitor.
3. Once you’ve installed the T1V app, open it and use the ViewHub credentials shown in the top right corner of the ViewHub monitor to connect. 

   

   NOTE: If you have an iOS (Apple) device, you must turn on “Screen Mirroring” in the device’s Control Center.

4. To display your screen on the ViewHub, choose Cast My Screen. To show the ViewHub monitor on your screen, choose Access ViewHub.

1. Click Disconnect from the T1V app. Those with iOS (Apple) devices must also turn off “Screen Mirroring” in the Control Center.
2. Turn off the ViewHub by pressing the Display Power button on the wall panel.